ETG Alcohol Test Strips
Get ETG Alcohol test strips as low as $0.74 per strip. You can get them in a pack of 25 strips. Convenient to use, the ETG alcohol test strips enable users to perform alcohol testing with complete ease and without seeking assistance.
Commonly used to identify the proportion of alcohol in human urine, the EtG alcohol test kit provides quick results in nearly five minutes.
The Ethyl Glucuronide(EtG) are actually traces found in the body after being exposed to ethanol, including alcoholic beverages. EtG is thus used here as a biological marker of alcohol consumption.
This ETG alcohol test strips will be used in situations where total abstinence is requested, such as during weaning or in certain professional places. Accurately, it is the anti-alcohol test to be used in situations where zero tolerance is required, i.e. where the least consumption of alcohol is completely proscribed. EtG can be detected in the urine for about 2 to 3 days after the last dose.
These alcohol EtG test strips were specifically calibrated to highlight alcohol consumption. Its detection threshold avoids the false positive results that would be due to parasitic alcohol intakes, such as the small amounts that can be ingested when using certain syrups, mouthwashes, hygiene products or even products household.
ETG Alcohol Test Strips Procedure:
- Remove the EtG test kit strips from its sealed pouch, or remove from the canister, and use it as soon as possible. For the best results, the test should be performed within an hour. The canister should be closed tightly after removing the EtG strips.
- Hold the etg test kit strip by the end, where the product name is printed. To avoid contamination, do not touch the strip membrane.
- Holding the strip vertically, dip the test strip in the urine specimen for at least 10-15 seconds. Do not immerse past the maximum line (MAX) on the test strip.
- After the test has finished running, remove the alcohol strip from the specimen and place it on a non-absorbent flat surface. Start the timer and wait for the colored band(s) to appear. The result should be read 5 minutes. Do not interpret the result after 10 minutes.
- Internal procedural controls are included in the test. A colored band appearing in the control region(C) is considered an internal positive procedural control, confirming sufficient specimen volume and correct procedural technique.
- External controls are not supplied with this kit. It is recommended that positive and negative controls be tested as a good laboratory practice to confirm the EtG test procedure to verify proper test performance.
Interpretation of Results
Positive: Only one colored band appears, in the control region ©. No apparent colored band appears in the test region (T) Negative: Two colored bands appear on the membrane. One brand appears in the control regions © and another band appears in the test region (T). Invalid: Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded. Please review the procedure and repeat with a new test. If the problems persist, discontinue using the kit immediately and contact your local distributor.]]>